Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.












DRAW-TITE Class 3 trailer hitches are the perfect mix of style and stability for those times when youre working on a home project or heading out on an adventure. This DRAW-TITE Class 3 receiver hitch is rated for up to 3,500 lbs. gross trailer weight (GTW) and up to 525 lbs. tongue weight (TW). No weight distribution kits can be used on this specific trailer hitch. DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 3 trailer hitch has a 2 inch square receiver tube opening so you can easily attach accessories like a bike rack or cargo carrier, or a utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 75914 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 38.7 LBS |
| GROSS TOWING WEIGHT: | 3,500 LBS. |
| GROSS TONGUE WEIGHT: | 525 LBS. |
| RECEIVER SIZE: | 2 IN. |
| HITCH CLASS: | III |
| DRILLING REQUIRED: | NO |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | VISIBLE |
| CROSS-TUBE TYPE: | SQUARE TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |

Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Lifetime
Draw•Tite® and the Checkered Flag Foundation
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2014 | Toyota Hilux SW4 | Class 3 Trailer Hitch: 3500 lbs 525/3,500 lbs. Weight Carrying (tongue weight/gross trailer weight) Uses all existing holes. No Drilling required Install Time is 15 minutes |
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Toyota Hilux SW4 75914 (Part #DT75914) fits 2014 Toyota Hilux SW4 models. The 2014 model year is the last year covered by this part number. For newer models, check for an updated version.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Toyota Hilux SW4 75914 (Part #DT75914) fits the following vehicles: 2014 Toyota Hilux SW4. Always verify your specific year, make, and model before ordering.
Yes, the Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Toyota Hilux SW4 75914 (Part #DT75914) is designed to fit the 2014 Toyota Hilux SW4.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Toyota Hilux SW4 75914 (Part #DT75914) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes. Part numbers 75914 and 84914 are both designed for the Toyota Hilux SW4. The manual does not specify differences between these two part numbers or whether they fit different model years or variants.
The hitch has a maximum gross trailer weight of 3500 lb (1588 kg) and a maximum tongue weight of 525 lb (238 kg). However, you must not exceed the lower of the towing vehicle manufacturer's rating or the hitch type rating—check your vehicle's documentation to confirm the actual limit for your Hilux SW4.
You will need a 19mm wrench and a torque wrench. The torque wrench must be capable of measuring to 76 Lb.-Ft. (103 N*M) for tightening the M12 x 1.25 fasteners.
The fastener kit 75914F includes 6 hex bolts (M12 x 1.25 x 35mm CL 8.8) and 6 conical toothed washers (1/2 inch). These bolts and washers are used to attach the hitch to the vehicle frame.
Yes. You must remove the tow hook from each side of the vehicle frame and return it to the vehicle owner. The hitch installation uses the existing weld nuts on the frame rails where the tow hooks were attached.
Raise the hitch and line up the two rearmost holes on each side bracket with the two rearmost holes on each side of the vehicle frame. Install the supplied bolts and conical washers through these aligned holes. The diagram shows the hitch positioned against the bumper fascia and frame rail.
All M12 x 1.25 CL 8.8 fasteners must be tightened to 76 Lb.-Ft. (103 N*M) using a torque wrench. There are 6 fasteners total, 3 on each side of the vehicle.
The conical toothed washers must be installed with the teeth side facing against the hitch. The washer size is 1/2 inch.
Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes.
Check the hitch frequently, making sure all fasteners and ball are properly tightened. The manual does not specify an exact interval, but recommends regular inspection as part of routine vehicle maintenance.
A hitch or ball which has been damaged should be removed and replaced. Do not attempt to repair a damaged hitch or ball.
Yes. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
The 75914 hitch is designed for the Toyota Hilux SW4.
You need a 19mm wrench and a torque wrench capable of measuring to 76 Lb.-Ft. (103 N*M).
Tighten all M12 x 1.25 CL 8.8 fasteners to 76 Lb.-Ft. (103 N*M) with a torque wrench.
Yes, remove the tow hook from each side of the vehicle frame and return it to the vehicle owner before installing the hitch.
Plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes.
Order by 2 PM ET, Monday–Friday, and it ships the same day.
Matt
Ordered online. Shipment arrived on time and with all the correct parts. Great customer service and friendly staff. Also, pricing was great!
May 22, 2023
Total for 4 items: $137.05$134.54