CURT
Verify Fitment
Select your vehicle to confirm this part fits.










Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 400 LB / 4,000 LB
WD / WDTW (Pounds): 4,000 LB / 400 LB
Weight Carrying Capacity (Pounds): 4,000 LB
WC Tongue Weight (Pounds): 400 LB
Weight Distribution (Pounds): 4,000 LB
WD Tongue Weight (Pounds): 400 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Land Rover LR2 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 4,000 lbs. WD and 400 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2015 | Land Rover LR2 | No Drilling Required Installation Time: 30-60 minutes Visibility: Exposed |
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Land Rover LR2 Trailer Hitch (Part #BKDK13052) fits 2008-2015 Land Rover LR2 models. The 2015 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT Class 3 Trailer Hitch, 2" Receiver, Select Land Rover LR2 Trailer Hitch (Part #BKDK13052) is designed to fit the 2008-2015 Land Rover LR2.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Land Rover LR2 Trailer Hitch (Part #BKDK13052) fits the following vehicles: 2008-2015 Land Rover LR2. Always verify your specific year, make, and model before ordering.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Land Rover LR2 Trailer Hitch (Part #BKDK13052) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
The hitch weight is 40 lbs.
Yes, Curt part number 13052 is designed for the Land Rover LR2.
Yes, the 13052 can be used as either a weight carrying hitch or a weight distribution hitch. Each configuration has different gross load capacities for trailer weight and tongue weight. Consult the manual's capacity table and do not exceed your vehicle manufacturer's recommended towing capacity.
You will need a ratchet, 22mm socket, 11/16" socket, and a torque wrench.
The kit includes: three 7/16-14 UNC hex cap screws grade 8 (part 10-10415), three 7/16" flat washers (30-00166), three 7/16-14 UNC serrated flange nuts grade 8 (20-00103), two hex bolts (10-10471), two 9/16" lock washers (30-00194), and two 9/16" flat washers (30-00202).
No, drilling is not required. The hitch uses existing weldnuts on the driver side frame rail and an existing tie down bracket on the passenger side frame rail.
Yes. Step 1 of the installation notes that it may be necessary to clean the existing weldnuts on the driver side frame rail before installation. Refer to the weldnut cleaning diagram in the manual.
1. Clean the existing weldnuts on the driver side frame rail if necessary. 2. Raise the hitch over the exhaust on the driver side and install an M14 bolt in the rearmost existing weldnut. 3. Attach the passenger side of the hitch to the vehicle tie down bracket on the passenger side frame rail using the 7/16" hardware. 4. Install the remaining M14 bolt in the driver side plate (the exhaust may need to be pushed forward for this). 5. Torque all M14 hardware to 126 ft-lbs and all 7/16" hardware to 70 ft-lbs.
The exhaust may need to be pushed forward to install the second M14 bolt in the driver side plate. The hitch is raised over the exhaust during the initial installation step.
All M14 hardware must be torqued to 126 ft-lbs.
All 7/16" hardware must be torqued to 70 ft-lbs.
Do not exceed your vehicle manufacturer's recommended towing capacity. The 13052 has different gross load capacities depending on whether it is used as a weight carrying hitch or a weight distribution hitch; refer to the capacity table in the manual for the specific limits.
Periodically check the hitch to ensure that all fasteners are tight and that all structural components are sound.
Curt Manufacturing warrants the product to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace it at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation. Curt's liability is limited to repair or replacement and excludes incidental or consequential loss or damage.
Yes, the Curt 13052 is designed for the Land Rover LR2.
No. The hitch uses existing weldnuts on the driver side frame rail and an existing tie down bracket on the passenger side.
You will need a ratchet, 22mm socket, 11/16" socket, and a torque wrench.
Torque all M14 hardware to 126 ft-lbs and all 7/16" hardware to 70 ft-lbs.
Do not exceed your vehicle manufacturer's recommended towing capacity. Refer to the manual's capacity table for the specific gross load limits when used as a weight carrying or weight distribution hitch.
Order by 2 PM ET, Monday–Friday, and it ships the same day.
Total for 5 items: $445.00$353.53
No reviews have been added for this product.