CURT
Verify Fitment
Select your vehicle to confirm this part fits.










Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 500 LB / 5,000 LB
WD / WDTW (Pounds): 7,500 LB / 750 LB
Weight Carrying Capacity (Pounds): 5,000 LB
WC Tongue Weight (Pounds): 500 LB
Weight Distribution (Pounds): 7,500 LB
WD Tongue Weight (Pounds): 750 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Commander (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 7,500 lbs. WD and 750 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2006 - 2010 | Jeep Commander | No Drilling Required Installation Time: 30-60 minutes Excluding Rocky Mountain Edition Visibility: Concealed |
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Jeep Commander Trailer Hitch (Part #BKDK13414) fits 2006-2010 Jeep Commander models. The 2010 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Jeep Commander Trailer Hitch (Part #BKDK13414) fits the following vehicles: 2006-2010 Jeep Commander. Always verify your specific year, make, and model before ordering.
Yes, the CURT Class 3 Trailer Hitch, 2" Receiver, Select Jeep Commander Trailer Hitch (Part #BKDK13414) is designed to fit the 2006-2010 Jeep Commander.
The CURT Class 3 Trailer Hitch, 2" Receiver, Select Jeep Commander Trailer Hitch (Part #BKDK13414) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, part number 13414 is designed for the Jeep Commander, excluding the Rocky Mountain Edition. If your vehicle is a Rocky Mountain Edition, this hitch is not compatible.
No. Curt part number 13414 is specifically designed for the Jeep Commander excluding the Rocky Mountain Edition. The Rocky Mountain Edition is not compatible with this hitch.
The hitch weight is 60 lbs.
The manual lists gross load capacity specifications but the exact values are not filled in on this copy. You must not exceed your vehicle manufacturer's recommended towing capacity. Contact Curt Technical Support at 877-287-8634 for the specific capacity ratings for this hitch.
The hitch includes 4 hex cap screws (HHCS), 1/2-13 UNC, Grade 5 (part number 10-10602) and 4 conical washers (part number 30-00149). These fasteners are used to secure the hitch to the existing holes in the bumper support.
Yes. You must lower the spare tire to allow access to the rear bumper support. After installation is complete, raise the spare tire back into position.
If your Jeep Commander is equipped with an OEM tow hook, you must remove it permanently for hitch installation. Removing the tow hook will increase installation time from 30 to 90 minutes.
No. The hitch uses existing holes in the bumper support. No drilling is required.
No. You do not need to remove the bumper. You must remove 6 plastic fasteners from the bumper fascia tabs and gently pull the bumper cover away from the vehicle to access the bumper support. After securing the hitch, reinstall the plastic fasteners and bumper cover.
All 1/2" fasteners must be torqued to 75 lb-ft.
Yes. The 6 plastic fasteners removed from the bumper fascia tabs in step 2 should be reused when reinstalling the bumper cover in step 5.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This regular inspection helps maintain safe operation and extends the life of the hitch.
You must not exceed your vehicle manufacturer's recommended towing capacity. The hitch has its own capacity ratings, but your vehicle's capacity is the limiting factor. Consult your vehicle's owner manual for the maximum towing capacity.
Yes, it fits all Jeep Commander models except the Rocky Mountain Edition.
All 1/2" fasteners must be torqued to 75 lb-ft.
Yes, lower the spare tire for access to the bumper support, then raise it back after installation.
4 hex cap screws (1/2-13 UNC, Grade 5) and 4 conical washers are included.
Yes, if equipped. The tow hook must be removed permanently. This increases installation time from 30 to 90 minutes.
Order by 2 PM ET, Monday–Friday, and it ships the same day.
Total for 5 items: $409.00$328.53
No reviews have been added for this product.