CURT
Verify Fitment
Select your vehicle to confirm this part fits.










Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Uses pre-existing vehicle hardware for installation
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 400 LB / 4,000 LB
WD / WDTW (Pounds): 5,000 LB / 500 LB
Weight Carrying Capacity (Pounds): 4,000 LB
WC Tongue Weight (Pounds): 400 LB
Weight Distribution (Pounds): 5,000 LB
WD Tongue Weight (Pounds): 500 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chrysler Town & Country, Dodge Grand Caravan, Ram C/V and Volkswagen Routan (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
4 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2016 | Chrysler Town & Country | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed Bumper fascia trimming required |
| 2008 - 2020 | Dodge Grand Caravan | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed Bumper fascia trimming required |
| 2012 - 2015 | Ram C/V | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed Bumper fascia trimming required |
| 2009 - 2014 | Volkswagen Routan | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed Bumper fascia trimming required |
Yes, the CURT 13364 Class 3 hitch is specifically designed to fit 2008-2016 Chrysler Town & Country models, so your 2012 is covered. This vehicle-specific design ensures a custom fit with seamless integration for that factory look.
Actually, Chrysler discontinued the Town & Country after 2016, so there wouldn't be a 2020 model. The CURT 13364 fits 2008-2016 Chrysler Town & Country models only. If you have a 2020 Chrysler Pacifica (which replaced the Town & Country), you'd need a different hitch.
The CURT 13364 fits these minivan models: 2008-2016 Chrysler Town & Country, 2008-2020 Dodge Grand Caravan, 2012-2015 Ram C/V, and 2009-2014 Volkswagen Routan. Each application is engineered for a vehicle-specific design to ensure proper fit and that concealed main body look.
Installation is rated as novice-level difficulty and takes about 30 minutes with basic hand tools. The CURT 13364 uses your vehicle's pre-existing hardware, so no drilling is required. It's designed for a vehicle-specific fit that makes the process straightforward for most DIY installers.
No. The 13364 uses existing vehicle fasteners and does not require drilling. You will use existing M10 and M12 bolts already in the vehicle frame weldnuts.
The manual does not specify which vehicle makes, models, years or configurations the 13364 fits. Contact CURT Product Support at 877-287-8634 or check curtmfg.com for fitment information before purchasing.
You will need: 3/8" drive ratchet, 3/8" drive sockets (13mm, 15mm, 18mm), torque wrench, screwdriver, utility knife, and punch. A tools reference guide is available at curtmfg.com/trailer-hitch-installation.
The manual does not specify whether battery disconnection is required. Contact CURT Product Support at 877-287-8634 for guidance.
Torque all M10 fasteners to 48 lb-ft and all M12 fasteners to 86 lb-ft.
Gross trailer weight (GTW) is 4,000 lbs with 400 lbs tongue weight. Weight distribution capacity is 5,000 lbs with 500 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes. You must remove the bolt(s) securing the exhaust and muffler hanger(s) to allow the exhaust to drop out of the way during hitch installation. After mounting the hitch, raise the muffler back into position and reinstall the exhaust hardware.
The 13364 uses existing vehicle hardware. No additional fasteners are included. You will reuse the existing M10 and M12 bolts already in your vehicle's frame weldnuts.
No. The installation requires you to lower the vehicle's exhaust. You must remove the bolt(s) securing the exhaust and muffler hanger(s) to allow the exhaust to drop out of the way for hitch installation.
The hitch may interfere with AC lines if present. During installation, make sure air conditioning lines are not pinched between the hitch and frame rail. If AC lines are present, verify clearance before fully tightening the hitch.
Some fascia trimming may be required. The manual includes a fascia trim diagram showing the area that may need trimming. The exact amount depends on your vehicle's configuration.
Remove two bolts using a 15mm socket and three bolts using an 18mm socket from the frame. IMPORTANT: Leave one M12 bolt on the passenger side of the vehicle frame toward the front of the vehicle—this bolt holds the bumper bracket to the vehicle frame and must not be removed.
Raise the hitch into position against the bottom of the vehicle frame and align the holes in the hitch frame brackets with the holes in the vehicle frame. You may need a punch or screwdriver to align the holes before inserting the bolts.
The 13364 uses existing M10 and M12 bolts from your vehicle's frame weldnuts. M10 fasteners are torqued to 48 lb-ft and M12 fasteners are torqued to 86 lb-ft.
Yes. Rotating the exhaust hanger bracket before tightening will add clearance between the side bracket and the exhaust. This may help if space is tight.
Wear safety glasses at all times while installing this product. When tightening the trailer hitch to the vehicle, make sure the hitch does not pinch or crush any AC lines, if applicable. Never exceed the vehicle manufacturer's recommended towing capacity.
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure. To help prevent damage to the product or vehicle, refer to the specified torque specifications (M10: 48 lb-ft, M12: 86 lb-ft) when checking hardware.
All M10 fasteners must be torqued to 48 lb-ft.
All M12 fasteners must be torqued to 86 lb-ft.
The tongue weight capacity is 400 lbs for weight carrying mode and 500 lbs for weight distribution mode.
The gross trailer weight (GTW) capacity is 4,000 lbs for weight carrying mode and 5,000 lbs for weight distribution mode.
The manual rates the installation difficulty as Easy, based on time and effort involved. However, difficulty may vary depending on installer expertise, vehicle condition, and proper tools and equipment. Contact CURT Product Support at 877-287-8634 if you have questions about your specific installation.
The manual does not specify whether extra people or lifting equipment are needed. Contact CURT Product Support at 877-287-8634 for guidance on your specific installation.
Order by 2 PM ET, Monday–Friday, and it ships the same day.
Total for 5 items: $409.00$328.53
No reviews have been added for this product.