CURT
Verify Fitment
Select your vehicle to confirm this part fits.










Order by 2 PM ET, Monday–Friday, and it ships the same day.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 500 LB / 5,000 LB
WD / WDTW (Pounds): 10,000 LB / 1,000 LB
Weight Carrying Capacity (Pounds): 5,000 LB
WC Tongue Weight (Pounds): 500 LB
Weight Distribution (Pounds): 10,000 LB
WD Tongue Weight (Pounds): 1,000 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Dodge Ram 1500 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2002 | Dodge Ram 1500 | Build Date: Built Before November 2002 No Drilling Required Installation Time: 30-60 minutes Built before November 2002 Visibility: Concealed |
The CURT 13326 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Dodge Ram 1500 (Part #BKDK13326) fits the following vehicles: 2002 Dodge Ram 1500. Always verify your specific year, make, and model before ordering.
Yes, the CURT 13326 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Dodge Ram 1500 (Part #BKDK13326) is designed to fit the 2002 Dodge Ram 1500.
The CURT 13326 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Dodge Ram 1500 (Part #BKDK13326) fits 2002 Dodge Ram 1500 models. The 2002 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 13326 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Dodge Ram 1500 (Part #BKDK13326) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
The kit includes: one 1/2" × 30" fishwire, two 0.250" × 1.00" × 3.00" square hole spacers (CM-SP6), two 1/2"-13 UNC grade 8 carriage bolts (10-10288), two 1/2"-13 UNC grade 8 serrated flange nuts (20-00062), two 5/8"-11 UNC flat head bolts (10-10517), two 5/8"-11 UNC grade 8 serrated flange nuts (20-00105), and one 0.625" × 2.00" backing plate (CM-13326-BP).
The Curt 13326 is designed for the 2002 Dodge Ram 1500 built before November 2002. If your truck was built after 11/02, this hitch may not fit. Verify your build date before purchasing or installing.
When used as a weight-carrying hitch, the gross load capacity is 5,000 lbs trailer weight and 500 lbs tongue weight. When used as a weight distribution hitch, the capacity is 10,000 lbs trailer weight and 1,000 lbs tongue weight. Do not exceed your vehicle manufacturer's recommended towing capacity.
No. The manual states "NO DRILLING REQUIRED." The hitch uses existing 3/4" diameter holes in the bumper cavity.
You will need: pliers (to remove plastic locking studs from the bumper), a torque wrench capable of 210 lb-ft, and the included 1/2" × 30" fishwire (to route bolts through the bumper beam). A socket set and wrenches to fit 1/2" and 5/8" fasteners are also required.
Yes. You must remove the bumper cover to access the steel bumper and the 3/4" diameter holes used for hitch attachment. The cover is held by four plastic locking studs underneath the bumper that must be squeezed together and pushed up to release the cover.
Locate the four plastic locking studs under the bumper. Using pliers, carefully squeeze each stud together and push it up through the bumper. Take care not to damage the locking tabs on the studs. From the top, carefully pull the bumper cover up. Do not deform the cover during removal.
The two 3/4" diameter holes on either side of the bumper cavity are used to attach the hitch. The 5/8" flat head bolts pass through these outer holes to secure the hitch to the bumper.
Insert a 1/2" carriage bolt and the rectangular backing plate into the end of the round inner bumper beam using the included 1/2" × 30" fishwire. Pull the bolts out through the holes in the bumper beam. The fishwire allows you to route the bolts through the hollow bumper beam without removing it.
Check for a gap between the bumper beam and the hitch mounting plate before final installation. If a gap exists, place one of the included 0.250" × 1.00" × 3.00" spacer plates (CM-SP6) between the bumper beam and the hitch mounting plate at the inner hole. If there is no gap, the spacer plate is not used.
Torque all 5/8" fasteners to 210 lb-ft and all 1/2" fasteners to 110 lb-ft.
After installation, verify that all fasteners are tight and all structural components are sound. Periodically check the hitch during use to ensure fasteners remain tight and components remain in good condition.
Curt Manufacturing warrants the hitch to be free of defects in material and workmanship at the time of retail purchase by the original purchaser. If defective, Curt may repair or replace it at their option when returned prepaid with proof of purchase. Warranty is voided by alteration, misuse, or improper installation.
Do not exceed your vehicle manufacturer's recommended towing capacity, even though the hitch is rated for up to 5,000 lbs (weight-carrying) or 10,000 lbs (weight distribution). Your vehicle's capacity may be lower and must be respected.
No drilling required. The hitch uses existing 3/4" holes in the bumper cavity.
Pliers, a torque wrench (to 210 lb-ft), socket set, wrenches for 1/2" and 5/8" fasteners, and the included fishwire.
Torque 5/8" fasteners to 210 lb-ft and 1/2" fasteners to 110 lb-ft.
Weight-carrying: 5,000 lbs trailer, 500 lbs tongue. Weight distribution: 10,000 lbs trailer, 1,000 lbs tongue. Do not exceed your vehicle manufacturer's capacity.
CURT
Total for 5 items: $362.00$353.53
No reviews have been added for this product.