CURT
Verify Fitment
Select your vehicle to confirm this part fits.










Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes installation hardware
Includes installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 400 LB / 4,000 LB
WD / WDTW (Pounds): 6,000 LB / 600 LB
Weight Carrying Capacity (Pounds): 4,000 LB
WC Tongue Weight (Pounds): 400 LB
Weight Distribution (Pounds): 6,000 LB
WD Tongue Weight (Pounds): 600 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Nissan Xterra (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2000 - 2004 | Nissan Xterra | Drilling Required Installation Time: 30-60 minutes Visibility: Exposed |
The CURT 13183 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Nissan Xterra (Part #BKDK13183) fits 2000-2004 Nissan Xterra models. The 2004 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 13183 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Nissan Xterra (Part #BKDK13183) fits the following vehicles: 2000-2004 Nissan Xterra. Always verify your specific year, make, and model before ordering.
Yes, the CURT 13183 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Nissan Xterra (Part #BKDK13183) is designed to fit the 2000-2004 Nissan Xterra.
The CURT 13183 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Nissan Xterra (Part #BKDK13183) Drilling is required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, Curt part number 13183 (also listed as 757231) is designed for 2000–2004 Nissan Xterra models. Confirm your vehicle year falls within this range before purchasing.
The kit includes: 6 × 1/2-13 UNC Grade 8 serrated flange nuts (part 20-00062), 2 × 0.250 × 1.38 × 8.94" square hole spacers (part CM-SP30), and 6 × 1/2-13 UNC 1-3/4" Grade 8 carriage bolts (part 10-10272).
No. The manual states 'NO DRILLING REQUIRED' for this hitch installation on the 00-04 Nissan Xterra.
Two steps are required before installation: (1) Lower the spare tire, and (2) Remove the exhaust from the rearmost hanger. These must be completed to access the frame rail where the hitch attaches.
Place the square hole spacers (part CM-SP30) inside the frame rail with the square end positioned toward the rear of the vehicle. Two spacers are included in the kit.
1. Lower spare tire and remove exhaust from rearmost hanger. 2. Place square hole spacers and carriage bolts inside the frame (square end of spacer to the rear). 3. Raise hitch into position and fasten with 1/2" flange nuts. 4. Torque all fasteners to 110 lb.-ft. 5. Reinstall spare tire.
Torque all fasteners to 110 lb.-ft. This applies to the 1/2-13 UNC Grade 8 flange nuts and carriage bolts that secure the hitch to the frame.
The manual lists two capacity ratings: weight carrying hitch capacity is 4,000 lbs. trailer weight and 400 lbs. tongue weight; weight distribution hitch capacity is 6,000 lbs. trailer weight and 600 lbs. tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. The manual does not specify an exact interval, but regular inspection before towing is recommended.
The manual does not specify which tools are required. You will need a socket or wrench to tighten the 1/2-13 UNC fasteners to 110 lb.-ft., which requires a torque wrench. A jack or lift may be needed to raise the hitch into position, but this is not explicitly stated.
The Curt 13183 is designed for 2000–2004 Nissan Xterra models only.
No drilling is required. The hitch uses existing frame holes.
Yes. Lower the spare tire and remove the exhaust from the rearmost hanger before installation.
Torque all fasteners to 110 lb.-ft.
As a weight carrying hitch: 4,000 lbs. trailer weight, 400 lbs. tongue weight. As a weight distribution hitch: 6,000 lbs. trailer weight, 600 lbs. tongue weight. Do not exceed your vehicle manufacturer's recommended towing capacity.
Order by 2 PM ET, Monday–Friday, and it ships the same day.
Total for 5 items: $539.00$525.53
No reviews have been added for this product.