Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.












Draw-tite
Draw-tite
Draw-tite
Draw-tite
Draw-tite
Total for 4 items: $137.05$134.54
Order by 2 PM ET, Monday–Friday, and it ships the same day.
DRAW-TITE Class 4 trailer hitches are the perfect mix of style and stability for those times when youre working on a home project or heading out on an adventure. This DRAW-TITE Class 4 receiver hitch is rated for up to 7,500 lbs. gross trailer weight (GTW) and up to 750 lbs. tongue weight (TW). No weight distribution kits can be used on this specific trailer hitch. DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 4 trailer hitch has a 2 inch square receiver tube opening so you can easily attach accessories like a bike rack or cargo carrier, or a utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 76477 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 15 LBS |
| GROSS TOWING WEIGHT: | 7,500 LBS. |
| GROSS TONGUE WEIGHT: | 750 LBS. |
| RECEIVER SIZE: | 2 IN. |
| HITCH CLASS: | IV |
| DRILLING REQUIRED: | NO |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | CONCEALED |
| CROSS-TUBE TYPE: | SQUARE TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |

Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2022 | Volkswagen Amarok | Class 4 Trailer Hitch: 7500 lbs 750/7,500 lbs. Weight Carrying (tongue weight/gross trailer weight) Uses all existing holes. No Drilling required Install Time is 15 minutes |
The Draw-tite Class 4 Trailer Hitch, 2" Square Receiver, Black for Select Volkswagen Amarok 76477 (Part #DT76477) fits the following vehicles: 2011-2022 Volkswagen Amarok. Always verify your specific year, make, and model before ordering.
Yes, the Draw-tite Class 4 Trailer Hitch, 2" Square Receiver, Black for Select Volkswagen Amarok 76477 (Part #DT76477) is designed to fit the 2011-2022 Volkswagen Amarok.
The Draw-tite Class 4 Trailer Hitch, 2" Square Receiver, Black for Select Volkswagen Amarok 76477 (Part #DT76477) fits 2011-2022 Volkswagen Amarok models. The 2022 model year is the last year covered by this part number. For newer models, check for an updated version.
The Draw-tite Class 4 Trailer Hitch, 2" Square Receiver, Black for Select Volkswagen Amarok 76477 (Part #DT76477) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the 76477 hitch is designed for 2010-2021 Volkswagen Amarok models. However, the manual recommends visiting the website for the most up-to-date information regarding specific application years and trim levels, as fitment may vary.
The 76477 is a weight-carrying hitch with a maximum gross trailer weight of 7500 lb (3402 kg) and a maximum tongue weight of 750 lb (340 kg). However, you must not exceed the lower of your towing vehicle manufacturer's rating or these limits.
You will need: a ratchet, a torque wrench, safety glasses, a 19 mm socket, a 6 inch socket extension, and a wire brush. The manual recommends professional installation if you are not comfortable performing the installation yourself.
The fastener kit 76477F includes four M12-1.5 x 45 GR 10.9 bolts. These bolts attach the hitch to the vehicle's bumper beam weldnuts.
Installation involves three steps: (1) Clean the bumper beam weldnuts using a wire brush to remove dirt or rust. (2) Raise the hitch into position and feed the four M12 bolts through the hitch holes and into the weldnuts of the bumper beam. (3) Tighten all M12-1.5 x 45 GR 10.9 fasteners with a torque wrench to 92 Ft.Lb. (125 N*M). Professional installation is recommended if you are not comfortable performing this yourself.
All M12-1.5 x 45 GR 10.9 fasteners must be tightened to 92 Ft.Lb. (125 N*M) using a torque wrench. Proper torque is essential to keep the hitch securely mounted to the vehicle when towing.
If excess sway occurs, take your foot off the gas pedal and hold the steering wheel as steady as possible. Do not apply your brakes and do not speed up. Reduce speed and maintain control of the vehicle.
No. The manual explicitly states: DO NOT cut, weld or modify this receiver. Modifications could compromise the structural integrity and safety of the hitch.
You should check the hitch frequently to ensure all fasteners and the ball are properly tightened. The manual emphasizes periodic inspection to maintain secure mounting during towing.
The maximum tongue weight is 750 lb (340 kg). You must not exceed this limit or the lower of your towing vehicle manufacturer's rating.
A hitch or ball which has been damaged should be removed and replaced immediately. Do not continue to use a damaged hitch, as it may fail during towing.
If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes. This protects the vehicle's interior and prevents corrosion.
Load the trailer heavier in front. This helps maintain proper weight distribution and improves towing stability.
Always wear safety glasses when installing the hitch. Observe safety precautions when working beneath a vehicle. Do not cut access or attachment holes with a torch. These precautions protect you from injury during installation.
Yes, the 76477 is designed for 2010-2021 Volkswagen Amarok. Check the manufacturer's website for the most current fitment information for your specific trim level.
Maximum gross trailer weight is 7500 lb (3402 kg) and maximum tongue weight is 750 lb (340 kg), but do not exceed your vehicle manufacturer's rating.
You need a ratchet, torque wrench, safety glasses, 19 mm socket, 6 inch socket extension, and wire brush. Professional installation is recommended if you are not comfortable.
Tighten all M12-1.5 x 45 GR 10.9 bolts to 92 Ft.Lb. (125 N*M) using a torque wrench.
Installation takes approximately 20 minutes for professional installers. The manual recommends professional installation if you are not comfortable performing it yourself. Contact a professional installer if needed.
No. Do not cut, weld, or modify this receiver. Modifications will compromise safety and void the warranty.
Ann
The staff was able to quickly assist me with locating the correct product I needed. Shipping was really fast. Item arrived in 2 days. Will be using TowUniverse again!!
May 22, 2023