Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.














DRAW-TITE Class 4 trailer hitches are the perfect mix of style and strength to get you and your equipment wherever you need to go. This DRAW-TITE Class 4 receiver hitch is rated for up to 6,000 lbs. gross trailer weight (GTW) and up to 600 lbs. tongue weight (TW). They are also suitable for use with weight distribution up to 12,000 lbs. weight distribution (WD) and 1,200 lbs. weight distribution tongue weight (WDTW). DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 4 trailer hitch has a 2 inch square receiver tube opening, allowing you to attach accessories like a bike rack or cargo carrier, or hook up your pop-up, boat trailer, or utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 75691 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 37.2 LBS |
| GROSS TOWING WEIGHT: | 6,000 LBS. |
| GROSS TONGUE WEIGHT: | 600 LBS. |
| RECEIVER SIZE: | 2 IN. |
| HITCH CLASS: | IV |
| DRILLING REQUIRED: | NO |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | CONCEALED |
| CROSS-TUBE TYPE: | SQUARE TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |
| GROSS TOWING WEIGHT WITH WEIGHT DISTRIBUTION: | 12,000 LBS. |
| GROSS TONGUE WEIGHT WITH WEIGHT DISTRIBUTION: | 1,200 LBS. |

Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Lifetime
Draw•Tite® and the Checkered Flag Foundation
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2009 - 2014 | Ford F-150 | Class 4 Trailer Hitch: 6000 lbs 600/6,000 lbs. Weight Carrying (tongue weight/gross trailer weight) 1,200/12,000 lbs. when used with a Weight Distribution Kit (tongue weight/gross trailer weight) Uses all existing holes. No Drilling required Install Time is 20 minutes Without Factory Installed Receiver |
Yes, the Draw-tite Class 4 Trailer Hitch, 2" Square Receiver, Black for Select Ford F-150 75691 (Part #DT75691) is designed to fit the 2009-2014 Ford F-150.
The Draw-tite Class 4 Trailer Hitch, 2" Square Receiver, Black for Select Ford F-150 75691 (Part #DT75691) fits the following vehicles: 2009-2014 Ford F-150. Always verify your specific year, make, and model before ordering.
The Draw-tite Class 4 Trailer Hitch, 2" Square Receiver, Black for Select Ford F-150 75691 (Part #DT75691) fits 2009-2014 Ford F-150 models. The 2014 model year is the last year covered by this part number. For newer models, check for an updated version.
The Draw-tite Class 4 Trailer Hitch, 2" Square Receiver, Black for Select Ford F-150 75691 (Part #DT75691) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Part number 75691 is a weight-distributing hitch assembly for Ford F-150 trucks. The complete installation kit includes the hitch uprights, bumper bracket, bumper, fastener kit (75691F), and all required hardware: four 1/2-13 X 2.0 Grade 5 hex bolts, two round spacers, eight conical washers, two 1/4" X 2.50 X 1.75 spacers, and four 1/2-13 hex nuts.
Part number 75691 is designed for Ford F-150 trucks. The manual does not specify model years, cab styles, bed lengths, or other configurations. Contact the manufacturer or your dealer to confirm fitment for your specific F-150 model.
The 75691 hitch has two capacity ratings depending on the ball mount used: Weight Distributing configuration supports a maximum gross trailer weight of 12,000 lb (5448 kg) and maximum tongue weight of 1,200 lb (545 kg). Weight Carrying Ball Mount configuration supports a maximum gross trailer weight of 6,000 lb (2724 kg) and maximum tongue weight of 600 lb (272 kg). Do not exceed the lower of the towing vehicle bumper bracket manufacturer's rating or the hitch type rating.
You will need an open-end 3/4" wrench, an open-end 7/8" wrench, and a torque wrench. The fastener kit 75691F is included with the hitch assembly.
Removal of the spare tire is optional but recommended to make installation easier. If you do remove it, you must reinstall it after hitch installation and ensure it does not contact the bolts.
1. Raise the hitch into position as shown in Figure 1. 2. Use fasteners to attach the hitch uprights to the bumper bracket. Attach remaining fasteners as shown. Item 4 (round spacer washer) must be sandwiched inside the slot on the bumper bracket. The hitch brackets and vehicle bracket will be drawn together. 3. Torque all fasteners to 75 lb-ft (102 N-m). 4. Reinstall the spare tire if it was removed, ensuring it does not contact the bolts.
All 1/2" Grade 5 fasteners must be tightened to 75 lb-ft (102 N-m) using a torque wrench.
Torque all 1/2" Grade 5 fasteners to 75 lb-ft (102 N-m) using a torque wrench.
The round spacer washer (Item 4) must be sandwiched inside the slot on the bumper bracket. It fits into the slot and is drawn together with the hitch brackets and vehicle bracket during fastener tightening.
The 75691F fastener kit includes: four 1/2-13 X 2.0 Grade 5 hex bolts, two round spacers, eight conical washers, two 1/4" X 2.50 X 1.75 spacers, and four 1/2-13 hex nuts. Fasteners are typical on both sides of the hitch.
After installation, check that the hitch is in the proper position as shown in Figure 1, all fasteners are tightened to 75 lb-ft (102 N-m), the spare tire does not contact any bolts, and all holes are properly sealed. The manual recommends checking the hitch frequently to ensure all fasteners and the ball are properly tightened.
Check the hitch frequently, making sure all fasteners and the ball are properly tightened. The manual does not specify an exact interval but emphasizes regular inspection.
Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes. A hitch or ball that has been damaged should be removed and replaced immediately.
A hitch or ball that has been damaged must be removed and replaced. Do not attempt to repair or continue using a damaged hitch or ball.
The wiring access location is PC3. The manual does not provide detailed wiring instructions or a wiring diagram. Contact the manufacturer for specific wiring procedures.
No. All required fasteners are included in the 75691F fastener kit that comes with the hitch assembly.
The hitch should be raised into the position shown in Figure 1 of the installation manual. The bumper bracket is a one-piece component, and the hitch uprights attach to it. The hitch brackets and vehicle bracket will be drawn together as fasteners are tightened.
If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes.
The spare tire must not contact the bolts. Reposition the spare tire to ensure adequate clearance, or contact the manufacturer to determine whether the hitch position needs adjustment or whether a different mounting location is required.
Using a torque wrench, retighten all 1/2" Grade 5 fasteners to 75 lb-ft (102 N-m). The manual recommends checking the hitch frequently to ensure all fasteners remain properly tightened. If fasteners continue to loosen, inspect for damage or improper assembly and contact the manufacturer.
Ensure the ball is properly tightened. The manual recommends checking the hitch frequently to ensure the ball is properly tightened. If the ball cannot be tightened or is damaged, it must be removed and replaced.
Order by 2 PM ET, Monday–Friday, and it ships the same day.
Sam
Ordered online. Shipment arrived on time and with all the correct parts. Great customer service and friendly staff. Also, pricing was great!
May 22, 2023