Draw-tite












Total for 4 items: $137.05$134.54
Order by 2 PM ET, Monday–Friday, and it ships the same day.
DRAW-TITE Class 3 trailer hitches are the perfect mix of style and strength to get you and your equipment wherever you need to go. This DRAW-TITE Class 3 receiver hitch is rated for up to 4,000 lbs. gross trailer weight (GTW) and up to 600 lbs. tongue weight (TW). They are also suitable for use with weight distribution up to 6,000 lbs. weight distribution (WD) and 600 lbs. weight distribution tongue weight (WDTW). DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 3 trailer hitch has a 2 inch square receiver tube opening, allowing you to attach accessories like a bike rack or cargo carrier, or hook up your pop-up, boat trailer, or utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 75792 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 33.3 LBS |
| GROSS TOWING WEIGHT: | 4,000 LBS. |
| GROSS TONGUE WEIGHT: | 600 LBS. |
| RECEIVER SIZE: | 2 IN. |
| HITCH CLASS: | III |
| DRILLING REQUIRED: | NO |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | CONCEALED |
| CROSS-TUBE TYPE: | SQUARE TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |
| GROSS TOWING WEIGHT WITH WEIGHT DISTRIBUTION: | 6,000 LBS. |
| GROSS TONGUE WEIGHT WITH WEIGHT DISTRIBUTION: | 600 LBS. |

Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Lifetime
Draw•Tite® and the Checkered Flag Foundation
Part number 75792 is a hitch for the Isuzu D-Max. It is manufactured by Cequent Performance Products, Inc. and complies with SAE J684 and New York V.E.S.C. Regulation V-5 safety specifications for towing systems.
The manual states that part number 75792 is designed for the Isuzu D-Max but does not specify year range, cab style, bed length, or other variants. Contact the manufacturer or a fitment database to confirm compatibility with your specific vehicle.
A 7/8" wrench and a torque wrench are required. The torque wrench must be capable of measuring to 110 Lb.-Ft. (149 N·M).
The hitch includes four carriage bolts (1/2"-13 x 1-3/4" Grade 8), four blocks (1/4" x 1" x 3"), four hex nuts (1/2"-13 Grade 8), four flat washers (1/2"), four lock washers (1/2"), and four pull wires (1/2"-13). A separate fastener kit (75792F) is also available.
The pull wire procedure is used to guide the carriage bolts through the hitch attachment holes. First, install the carriage bolts and blocks into the frame rail, leaving the pull wires attached. Position the hitch beneath the frame rail. Use the pull wires to insert the carriage bolts through the hitch attachment holes, then remove the pull wires. The pull wire should be kinked to keep the block independent of the bolt.
1. Using the pull wire procedure, install the carriage bolts and blocks into the frame rail. Leave the pull wires attached. 2. Position the hitch beneath the frame rail as shown. 3. Use the pull wires to insert the carriage bolts through the attachment holes of the hitch. Remove the pull wires. 4. Install the flat washers, lock washers, and nuts. 5. Torque all fasteners to specification (110 Lb.-Ft.).
All 1/2"-13 Grade 8 fasteners must be tightened to 110 Lb.-Ft. (149 N·M) using a torque wrench.
The hitch has two rating configurations: Weight Distributing hitch with a maximum gross trailer weight of 6,000 lb (2,724 kg) and maximum tongue weight of 600 lb (272 kg); Weight Carrying Ball Mount with a maximum gross trailer weight of 4,000 lb (1,816 kg) and maximum tongue weight of 600 lb (272 kg). Do not exceed the lower of the towing vehicle manufacturer's rating or the hitch rating.
Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes. A damaged hitch or ball must be removed and replaced immediately.
Check the hitch frequently, making sure all fasteners and the ball are properly tightened. The manual does not specify a retorque interval or inspection schedule beyond this general recommendation.
Part number 75792 is designed for the Isuzu D-Max. Confirm your specific vehicle year, cab style and bed length with the manufacturer or a fitment database before purchasing.
You need a 7/8" wrench and a torque wrench capable of measuring to 110 Lb.-Ft. (149 N·M).
Torque all 1/2"-13 Grade 8 fasteners to 110 Lb.-Ft. (149 N·M) using a torque wrench.
Weight Distributing: 6,000 lb (2,724 kg) gross trailer weight, 600 lb (272 kg) tongue weight. Weight Carrying Ball Mount: 4,000 lb (1,816 kg) gross trailer weight, 600 lb (272 kg) tongue weight. Do not exceed the lower of your vehicle manufacturer's rating or the hitch rating.
No. Do not cut access or attachment holes with a torch. Wear eye protection and observe safety precautions when working beneath the vehicle.
Sam
Ordered online. Shipment arrived on time and with all the correct parts. Great customer service and friendly staff. Also, pricing was great!
May 22, 2023