Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.
















DRAW-TITE Class 3 trailer hitches are the perfect mix of style and strength to get you and your equipment wherever you need to go. This DRAW-TITE Class 3 receiver hitch is rated for up to 5,000 lbs. gross trailer weight (GTW) and up to 500 lbs. tongue weight (TW). They are also suitable for use with weight distribution up to 6,000 lbs. weight distribution (WD) and 600 lbs. weight distribution tongue weight (WDTW). DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 3 trailer hitch has a 2 inch square receiver tube opening, allowing you to attach accessories like a bike rack or cargo carrier, or hook up your pop-up, boat trailer, or utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 75112 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 38 LBS |
| GROSS TOWING WEIGHT: | 5,000 LBS. |
| GROSS TONGUE WEIGHT: | 500 LBS. |
| RECEIVER SIZE: | 2 IN. |
| HITCH CLASS: | III |
| DRILLING REQUIRED: | NO |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | VISIBLE |
| CROSS-TUBE TYPE: | ROUND TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |
| GROSS TOWING WEIGHT WITH WEIGHT DISTRIBUTION: | 6,000 LBS. |
| GROSS TONGUE WEIGHT WITH WEIGHT DISTRIBUTION: | 600 LBS. |

Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Lifetime
Draw•Tite® and the Checkered Flag Foundation
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2001 - 2005 | Ford Explorer Sport Trac | Class 3 Trailer Hitch: 5000 lbs 500/5,000 lbs. Weight Carrying (tongue weight/gross trailer weight) 600/6,000 lbs. when used with a Weight Distribution Kit (tongue weight/gross trailer weight) Uses all existing holes. No Drilling required Install Time is 15 minutes |
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Ford Explorer Sport Trac 75112 (Part #DT75112) fits the following vehicles: 2001-2005 Ford Explorer Sport Trac. Always verify your specific year, make, and model before ordering.
Yes, the Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Ford Explorer Sport Trac 75112 (Part #DT75112) is designed to fit the 2001-2005 Ford Explorer Sport Trac.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Ford Explorer Sport Trac 75112 (Part #DT75112) fits 2001-2005 Ford Explorer Sport Trac models. The 2005 model year is the last year covered by this part number. For newer models, check for an updated version.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Ford Explorer Sport Trac 75112 (Part #DT75112) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, part number 75112 is designed for Ford Explorer Sport Trac. The hitch is supplied with part numbers 75112, 44718, 87008, and 78206 as a complete kit.
The maximum towing capacity depends on the hitch type and your vehicle's manufacturer rating. For weight distributing hitches, the maximum gross trailer weight is 6000 lb (2724 kg) with a maximum tongue weight of 600 lb (272 kg). For weight carrying ball mount hitches, the maximum gross trailer weight is 5000 lb (2270 kg) with a maximum tongue weight of 500 lb (227 kg). Do not exceed the lower of your vehicle manufacturer's rating or these limits.
You will need wrenches in the following sizes: 13/16 inch, 7/8 inch, and 15/16 inch. You will also need a torque wrench to tighten fasteners to the specified torque values. No drill bits are required.
The fastener kit F75112 includes: (2) hex bolts 9/16-12 x 2-1/2" GR5, (2) carriage bolts ½-13 x 1-3/4" GR5, (2) spacer blocks ¼ x 1-1/2 x 2, (2) spacer blocks ¼ x 1-1/2 x 2, (2) spacer blocks 3/8 x 1-1/2 x 2, (2) lock washers 9/16", (2) conical toothed washers, (2) hex nuts ½-13, and (2) hex nuts 9/16-12.
No, drilling is not required. The manual lists "Drill Bits: None" under Equipment Required.
All ½-13 GR5 fasteners must be tightened with a torque wrench to 75 Lb.-Ft. (102 N·M).
All 9/16-12 GR5 fasteners must be tightened with a torque wrench to 110 Lb.-Ft. (149 N·M).
1. Raise the receiver into position and attach with fasteners as shown in the diagram. 2. Tighten all ½-13 GR5 fasteners with a torque wrench to 75 Lb.-Ft. (102 N·M). Tighten all 9/16-12 GR5 fasteners with a torque wrench to 110 Lb.-Ft. (149 N·M).
Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. A hitch or ball which has been damaged should be removed and replaced immediately.
Check the hitch frequently, making sure all fasteners and the ball are properly tightened. If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
The wiring access location is SUV1 or SUV2.
Yes, the 75112 is designed specifically for Ford Explorer Sport Trac.
You need wrenches (13/16, 7/8, 15/16 inch) and a torque wrench. No drilling is required.
Tighten ½-13 GR5 fasteners to 75 Lb.-Ft. (102 N·M) and 9/16-12 GR5 fasteners to 110 Lb.-Ft. (149 N·M) using a torque wrench.
Maximum gross trailer weight is 6000 lb (weight distributing) or 5000 lb (weight carrying ball mount), with maximum tongue weight of 600 lb or 500 lb respectively. Do not exceed your vehicle manufacturer's rating.
Plug all holes in the trunk pan or body panels to prevent water and exhaust fume entry.
Check the hitch frequently to ensure all fasteners and the ball are properly tightened.
Total for 4 items: $137.05$134.54
Jennifer
The staff was able to quickly assist me with locating the correct product I needed. Shipping was really fast. Item arrived in 2 days. Will be using TowUniverse again!!
May 22, 2023
Order by 2 PM ET, Monday–Friday, and it ships the same day.
Draw-tite