CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Order by 2 PM ET, Monday–Friday, and it ships the same day.












Includes harness, 4-flat extension, mounting bracket and hardware
Includes harness, 4-flat extension, mounting bracket and hardware
Warranty: One-Year Limited Warranty
Finish: Blank
Installation Time Exact (Minutes): 0
Towing your vehicle behind your RV is a great way to experience more of the adventure on your cross-country excursions. Whether you're towing a compact car or a full-size truck, CURT has the perfect solution to help you Bring It! CURT towed-vehicle RV harnesses are a vehicle-specific, plug-and-play solution to wiring your vehicle for dinghy towing. They use original-equipment-compatible connectors to plug into your vehicle's wiring system without any cutting, splicing or soldering required. They provide a standard 4-way flat connector to plug into the RV socket and synchronize the vehicle's tail lights, turn signals and brake lights with the RV's. Because each towed-vehicle RV harness has a vehicle-specific design, installation is fast and easy. This particular RV dinghy towing wiring harness is designed for specific years of the Ford F-250 Super Duty and F-350 Super Duty with backup sensors. CURT RV harnesses are also built to provide long-lasting operation. They feature integrated block diodes that protect the vehicle's circuits from the RV signals. They isolate the sensitive vehicle electronics, keeping them from overheating and short circuiting. Every CURT towed-vehicle RV harness comes ready to install with all necessary hardware included. They also come with a 4-way flat extension to provide plenty of length to plug into the RV socket, as well as a connector mounting bracket to mount the connector on the vehicle.

CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
One-Year Limited Warranty
Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
2 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2020 - 2022 | Ford F-250 Super Duty | With backup sensors |
| 2020 - 2022 | Ford F-350 Super Duty | With backup sensors |
The CURT Custom RV Wiring Harness, Select Ford F-250, F-350 with Backup Sensors Trailer Connector Kit (Part #BKDK52102) fits 2020-2022 Ford F-250 Super Duty models. The 2022 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT Custom RV Wiring Harness, Select Ford F-250, F-350 with Backup Sensors Trailer Connector Kit (Part #BKDK52102) is designed to fit the 2020-2022 Ford F-250 Super Duty.
The CURT Custom RV Wiring Harness, Select Ford F-250, F-350 with Backup Sensors Trailer Connector Kit (Part #BKDK52102) fits the following vehicles: 2020-2022 Ford F-250 Super Duty; 2020-2022 Ford F-350 Super Duty. Always verify your specific year, make, and model before ordering.
The CURT Custom RV Wiring Harness, Select Ford F-250, F-350 with Backup Sensors Trailer Connector Kit (Part #BKDK52102) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Part 52102 is a custom wiring harness with a 4-flat connector manufactured by Curt Manufacturing. It provides trailer light wiring for trucks by connecting to the vehicle's taillight wiring and routing a 4-flat connector to the front of the truck for trailer attachment. The harness includes a white ground wire with ring terminal and a 4-flat dust cover.
The manual indicates the product is designed for both diesel and gas trucks. On diesel trucks, batteries are located on both sides of the vehicle; on gas trucks, the battery is typically on the passenger side. However, the manual does not specify which truck models, years, cab styles, or bed lengths are compatible. Consult the manufacturer or a fitment database for your specific vehicle.
Required tools are: panel trim removal tool, fish wire, drill, electrical tape, 3/32" drill bit, and cutting tool. Fish wire can be made from a cut-up wire hanger, stiff wire, rope, or string depending on what is needed for the installation.
The harness includes a white ground wire with ring terminal, a 4-flat connector, a ground screw (for use if drilling a new grounding point), and a 4-flat dust cover. The manual shows a hardware photo but does not itemize all components by quantity.
Yes. Step 1 requires you to disconnect the negative battery terminal and fasten this wire down and away from the battery while completing the installation. This is a safety measure to prevent accidental shorts or electrical shocks.
The taillight wiring connectors are located on the rear inside frame rail on the passenger side of the vehicle, behind the taillight housing. The connectors will be similar to those on the custom wiring product. Separate them from the taillight housing carefully, taking care not to damage the locking tabs.
The guide identifies five wiring locations for trucks: T1 (behind driver side taillight housing), T2 (behind passenger side taillight housing), T3 (behind driver side rear bumper), T4 (behind center of rear bumper fascia), and T5 (behind passenger side rear bumper). The product uses location T5 for the 52102 harness.
Drilling may be required. You must locate a grounding point such as an existing screw or bolt in the vehicle frame. If no suitable existing fastener is available, you will need to drill a 3/32" pilot hole. The area must be free from rust, dirt, and paint (use an abrasive pad or paper to clean it). Before drilling, check for miscellaneous items hidden behind or under any surface to avoid damage and personal injury.
A 3/32" drill bit is required if you need to drill a pilot hole for the ground screw. This is only necessary if no suitable existing fastener is available on the vehicle frame.
Route the 4-flat along and above the frame rail on the passenger side up to the rear of the passenger's front tire (Step 4). Then use fish wire to pull the harness down along the inner and outer fender through the wheel well lining into the engine compartment (Step 5). Finally, route the 4-flat along the passenger-side inner fender to the front of the truck (Step 6).
Fish wire is a tool used to push or pull an electrical wire through a blind hole. It can be made from a cut-up wire hanger, stiff wire, rope, or string. Make sure it is long enough to stick out on the other side of the hole. Insert it through the blind hole, locate it on the other side, use tape to secure the harness to the fish wire, and pull back. If the fish wire or harness gets hung up, you may need to push back down, wiggle it around, or twist the wire to loosen it.
Secure excess wire so it is not drooping or dangling, but not so tight that it causes unnecessary strain, which could lead to breakage over time. After removing slack from the 4-flat wire, tighten any zip ties and add as needed. Use a zip tie to fasten any excess wire to a solid spot along the firewall.
Reinstall all items removed during installation. If the negative battery terminal was disconnected at the beginning, reconnect it. Install the provided 4-flat dust cover to help prevent corrosion. Test the harness by attaching the 4-flat to any vehicle with functioning trailer lights; the taillights on the tow vehicle should function along with the taillights on the towing vehicle.
The manual does not specify a product rating or towing capacity. However, it warns: do not exceed the product rating or tow vehicle lamp load rating, whichever is lower. Contact the manufacturer for the product's specific rating.
Do not lay tools across the positive battery terminal (typically noted with red covers or a red '+' symbol). This can cause a ground short, resulting in sparks and/or electrical shocks. When disconnecting the negative battery terminal, fasten this wire down and away from the battery while completing the installation.
Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and/or personal injury. This is especially important when drilling the 3/32" pilot hole for the ground screw.
Periodic inspection of all wires and connections should be performed to ensure there is no visible damage or loose connections. The manual does not specify an inspection interval; consult the manufacturer for recommended maintenance schedules.
Test for proper function by using a test light or by connecting a properly wired trailer. Verify that the harness is functioning by attaching the 4-flat to any vehicle with functioning trailer lights. The taillights on the tow vehicle should function along with the taillights on the towing vehicle.
The 52102 is designed for trucks (diesel and gas). Specific vehicle compatibility by year, make, model, cab style, and bed length is not listed in the manual. Check with the manufacturer or a fitment database for your vehicle.
You need a panel trim removal tool, fish wire, drill, electrical tape, 3/32" drill bit, and cutting tool. Fish wire can be made from a wire hanger, stiff wire, rope, or string.
Yes, disconnect the negative battery terminal and fasten it away from the battery before starting installation. Reconnect it after reinstalling all removed items.
Drilling may be required. You must find an existing fastener on the frame for the ground wire. If none is available, drill a 3/32" pilot hole. Always check for hidden items before drilling.
The manual rates installation difficulty as 'Easy' but does not specify an installation time. Time may vary depending on installer expertise, vehicle condition, and proper tools.
No reviews have been added for this product.