B&W Trailer Hitches

Verify Fitment
Select your vehicle to confirm this part fits.

| GTW | 16,000 lbs |
| PROP 65 WARNING: | WARNING: This product may expose you to chemicals including Nickel (Metallic), which is known to the state of California to cause cancer. For more information, go to www.P54Warnings.ca.gov. |

B&W Trailer Hitches is an American manufacturer known for durable, innovative towing products, including gooseneck hitches, fifth-wheel hitches, receiver hitches, and ball mounts. Built in Kansas by employee-owners, B&W products are engineered for dependable performance, easy installation, and long-lasting quality.
B&W Trailer Hitches is an American manufacturer known for building innovative, dependable towing products designed to make hitching easier and towing more comfortable. The company began in 1987 in Humboldt, Kansas, when founders Roger Baker and Joe Works combined their fabrication experience to build custom truck beds and solve common problems faced by truck owners.
B&W changed the gooseneck hitch industry with the introduction of the Turnoverball Gooseneck Hitch. Its under-bed mounting system and reversible hitch ball allowed truck owners to quickly store the ball beneath the bed, leaving a clean and unobstructed surface when the hitch was not in use. B&W later applied the same practical approach to the Companion Fifth Wheel Hitch, creating a removable fifth-wheel hitch engineered for a quiet, smooth, and secure towing experience.
Today, B&W manufactures gooseneck hitches, fifth-wheel hitches, receiver hitches, ball mounts, and towing accessories at its nearly 600,000-square-foot facility. The company is owned by approximately 500 employee-owners who remain committed to American manufacturing, trusted materials, skilled craftsmanship, and long-lasting product quality.
Whether you are towing a work trailer, livestock trailer, camper, or fifth wheel, B&W Trailer Hitches offers thoughtfully engineered towing equipment built to perform mile after mile.
14 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1999 - 2001 | Chevrolet C1500 | — |
| 1999 - 2000 | Chevrolet C2500 | — |
| 1999 | Chevrolet K1500 | — |
| 1999 - 2000 | Chevrolet K2500 | — |
| 1999 - 2018 | Chevrolet Silverado 1500 | — |
| 2007 | Chevrolet Silverado 1500 Classic | — |
| 1999 - 2007 | Chevrolet Silverado 2500 | — |
| 1999 | GMC C1500 | — |
| 1999 - 2000 | GMC C2500 | — |
| 1999 | GMC K1500 | — |
| 1999 - 2000 | GMC K2500 | — |
| 1999 - 2018 | GMC Sierra 1500 | — |
| 2007 | GMC Sierra 1500 Classic | — |
| 1999 - 2004 | GMC Sierra 2500 | — |
The B&W Trailer Hitches Rcvr Hitch-2", 16,000# Boxed Trailer Hitch BQVLHDRH25217 (Part #BQVLHDRH25217) fits the following vehicles: 1999-2001 Chevrolet C1500; 1999-2000 Chevrolet C2500; 1999 Chevrolet K1500; 1999-2000 Chevrolet K2500; 1999-2018 Chevrolet Silverado 1500; 2007 Chevrolet Silverado 1500 Classic; 1999-2007 Chevrolet Silverado 2500; 1999 GMC C1500; 1999-2000 GMC C2500; 1999 GMC K1500; 1999-2000 GMC K2500; 1999-2018 GMC Sierra 1500; 2007 GMC Sierra 1500 Classic; 1999-2004 GMC Sierra 2500. Always verify your specific year, make, and model before ordering.
The B&W Trailer Hitches Rcvr Hitch-2", 16,000# Boxed Trailer Hitch BQVLHDRH25217 (Part #BQVLHDRH25217) fits 1999-2001 Chevrolet C1500 models. The 2018 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the B&W Trailer Hitches Rcvr Hitch-2", 16,000# Boxed Trailer Hitch BQVLHDRH25217 (Part #BQVLHDRH25217) is designed to fit the 1999-2001 Chevrolet C1500.
The B&W Trailer Hitches Rcvr Hitch-2", 16,000# Boxed Trailer Hitch BQVLHDRH25217 (Part #BQVLHDRH25217) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the HDRH25217 fits 2008–2018 Chevrolet 1500 Light Duty Trucks with factory bumper. Your vehicle must be in original, as-manufactured condition. If your truck has replacement parts or other modifications, compatibility is not guaranteed. Inspect your vehicle for modifications before installation.
Yes, the HDRH25217 fits 1999–2007 Chevrolet & GMC 1500 & 2500 Light Duty Trucks with factory bumper. Your vehicle must be in original, as-manufactured condition. If your truck has replacement parts or other modifications, compatibility is not guaranteed. Inspect your vehicle for modifications before installation.
Compatibility with vehicles having replacement parts or other modifications is not guaranteed. The product was designed to fit vehicles in their original, as-manufactured condition. You must inspect your vehicle for modifications before installation. If modifications are present, contact B&W Trailer Hitches at 800.248.6564 or hitches@turnoverball.com for fitment support.
Some truck models require spare tire removal to provide easier access to the frame during installation. After installation, the spare tire can be replaced. Some models require the spare tire to be pushed toward the cab while being raised into position to allow clearance for the receiver hitch. Check your specific truck model during the preparation steps.
For trucks 2014 and newer, a light duty bumper mount may be present in the installation area. This mount must be removed. After removal, retain and re-install the existing M12 nuts and stud plates, and torque them to 52 ft-lbs. See Figure A1 in the manual for identification.
Any brackets or accessories not critical to the structure of the vehicle that are mounted to the bottom of the frame in the installation area may need to be removed. This includes bumper reinforcement brackets if the bumper will not be used for towing. Check the hitch location during positioning to identify any interference. Non-structural items should be removed; structural components must remain.
Required tools: impact wrench or ratchet with 3/4", 13mm, 18mm, and 21mm sockets; 3/4" box end wrench; torque wrench capable of tightening to 80 ft-lbs; eye and ear protection. A flat head screwdriver is optional. Verify you have all tools before beginning installation.
The kit includes: 1 hitch center section, 1 driver side plate, 1 passenger side plate, 1 trailer plug bracket, 4 × 1/2" × 2" hex head cap screws, 8 × 1/2" × 1-1/2" hex head cap screws, 12 × 1/2" hex finish nuts, 12 × 1/2" split lock washers, 4 × 3/16" × 1 × 1-1/2" spacers, 2 × 3/16" × 1-1/4" × 1-1/2" spacers, 2 × 3/16" × 1-1/2" × 3" spacers, and 2 × #14 × 3/4" sheet metal screws. Verify all parts are present before installation.
1. Assemble the hitch by attaching the side plates to the hitch center section using 1/2" × 1-1/2" bolts, lock washers, and nuts; do not fully tighten. 2. Position and mount the hitch under the frame, aligning the slots in the rear side plate ears with the holes where the 14mm bolts were removed. 3. Reinstall the 14mm bolts to secure the hitch. 4. Install remaining hardware with spacers in their proper locations. 5. Tighten hardware in two stages: first the frame-to-side plate connections, then the center section-to-side plate connections.
The side plates must be attached to the hitch center section with the "ears" of the side plates toward the outside. The side plates must mount against the bottom of the frame. Refer to the main diagram on the front page for correct orientation.
Maneuver the hitch under the frame and align the slots in the rear most side plate ears with the holes where the 14mm bolts were previously removed. Make sure the hitch is centered between the frame rails of the vehicle and that the receiver tube is parallel to the centerline of the truck. Secure the hitch by reinstalling the 14mm bolts.
No. When assembling the hitch and attaching the side plates to the hitch center section, do not fully tighten the hardware at this time. Final tightening occurs after the hitch is positioned and mounted to the frame.
Tighten hardware in two stages: 1. First, tighten the connections between the frame and the side plates. Torque the 1/2" bolts to 80 foot pounds and the 14mm bolts to 135 foot pounds. 2. Next, tighten the connections between the center section and the side plates, ensuring the edges of the side plate mounting brackets on the center section match up with the bottom and rearward edges of the side plates. Torque these bolts to 80 foot pounds.
Torque the 1/2" bolts to 80 foot pounds. This applies to both the frame-to-side plate connections and the center section-to-side plate connections.
Torque the 14mm bolts to 135 foot pounds. These bolts secure the hitch to the rear of the frame.
Torque the existing M12 nuts and stud plates to 52 ft-lbs after removing the light duty bumper mount and before re-installing them.
The trailer plug mounting bracket is optional. It is included with the hitch. If your vehicle does not have a place to mount the trailer wiring receptacle, this bracket will accept many different receptacles on the market. Mount it using the two self-tapping sheet metal screws as shown in Figure B1. Be aware of ground clearance limitations that this bracket or any other may add to the hitch.
Always use safety chains while towing; crossing them under the trailer tongue may prevent some damage if detachment occurs. Do not exceed the tow or tongue rating of the coupler, hitch, truck, or trailer. Understand all towing risks before proceeding. For wedge car trailers, keep the center of gravity low by loading heavy cars over the axles, never tow a single car on the front, and never exceed reasonable speeds for roadway conditions. Failure to follow these practices may cause damage to towing components or loss of attachment between truck and trailer.
Adding components to the vehicle chassis is hazardous. Potential hazards include unexpected combustion of fuel, electric shock, burns, shifting or falling of an unstable vehicle, damage to the vehicle, and injury from tool usage. Installation must be completed by someone knowledgeable of these hazards and proper safety procedures for vehicle modifications. Eye and ear protection are required.
Periodically inspect the hitch to make sure that all fasteners are tightly secured. No specific inspection interval is provided in the manual. If fasteners become loose, re-tighten them to the specified torque values: 1/2" bolts to 80 foot pounds and 14mm bolts to 135 foot pounds.
No. Do not modify this product in any manner. Doing so could alter its integrity and lead to a loss of attachment between the trailer and the tow vehicle. The product was designed to fit vehicles in their original, as-manufactured condition. If the hitch does not fit your truck, contact B&W Trailer Hitches at 800.248.6564 or hitches@turnoverball.com for support.
The manual identifies this as a 16K Heavy Duty Receiver Hitch but does not specify a towing capacity. Refer to your vehicle and trailer manufacturer information for tow and tongue ratings. Do not exceed the tow or tongue rating of the coupler, hitch, truck, or trailer.
Yes, the HDRH25217 fits 2008–2018 Chevrolet & GMC 1500 Light Duty Trucks with factory bumper, provided the vehicle is in original, as-manufactured condition.
Yes, the HDRH25217 fits 1999–2007 Chevrolet & GMC 1500 & 2500 Light Duty Trucks with factory bumper, provided the vehicle is in original, as-manufactured condition.
Impact wrench or ratchet with 3/4", 13mm, 18mm, and 21mm sockets; 3/4" box end wrench; torque wrench capable of 80 ft-lbs; eye and ear protection.
Remove the light duty bumper mount, retain the existing M12 nuts and stud plates, and re-install them torqued to 52 ft-lbs.
Torque 1/2" bolts to 80 ft-lbs and 14mm bolts to 135 ft-lbs. For 2014+ trucks, torque M12 nuts and stud plates to 52 ft-lbs.
Always use safety chains. Do not exceed tow or tongue ratings. For wedge car trailers, load heavy cars over axles, never tow a single car on the front, and maintain reasonable speeds. Periodically inspect the hitch to ensure all fasteners are tight.
| Part # | Class | GTW / TW | Ball Diameter | Latch Style | Channel Width | Finish |
|---|---|---|---|---|---|---|
| 25101 | 3 | 5,000 / 700 lbs. | 2" | Posi-lock | -- | Zinc-plated |
| 25210 | 3 | 5,000 / 700 lbs. | 2" | Posi-lock | -- | Gloss black |
| 25217 | 4 | 7,000 / 1,050 lbs. | 2" | Sleeve-lock | -- | Gloss black |
| 25200 | 4 | 10,000 / 1,500 lbs. | 2-5/16" | Easy-lock | -- | Gloss black |
| 25227 | 4 | 12,500 / 1,875 lbs. | 2-5/16" | Sleeve-lock | -- | Gloss black |
Order by 2 PM ET, Monday–Friday, and it ships the same day.
B&W Trailer Hitches
B&W Trailer Hitches
B&W Trailer Hitches
B&W Trailer Hitches
B&W Trailer Hitches
No reviews have been added for this product.