CURT
Verify Fitment
Select your vehicle to confirm this part fits.


















Complete CURT Class 3 2" trailer hitch and 4-flat custom wiring kit engineered for the 1995 - 1998 Ford Windstar. Vehicle-specific fit, plug-and-play installation, all hardware and instructions included.
This custom kit fits the following vehicles:
All Hardware and Installation Instructions Included!
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Windstar (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
CURT custom wiring is the easiest way to outfit your vehicle with a trailer wiring connection. Each harness is engineered for a specific make and model and uses an OEM-compatible plug, so no cutting or splicing is required during installation. Provides a 4-way flat connector socket for tail lights, brake lights and turn signals. Includes a dust cover and is backed by a limited one-year warranty.

CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1995 - 1998 | Ford Windstar | — |
Curt part number 13085 is designed for 1994–2003 Ford Windstar vans only. If your vehicle is a different model, year, or body style, this hitch will not fit. Verify your vehicle year and model before purchasing.
The kit includes: one 1/2" fishwire, six 0.250 × 1.00 × 2.50" square hole spacers (part CM-SP10), six 1/2"-13 UNC carriage bolts grade 8 (part 10-10272), and six 1/2"-13 UNC serrated flange nuts grade 8 (part 20-00062). All fasteners are grade 8 and must be torqued to 110 lb-ft.
Yes, drilling is required. The installation uses existing frame slots for initial fastening, but you must drill two 1/2" holes per side (four holes total) for additional mounting hardware. A 1/2" drill bit is needed.
Fishwiring is a fastening technique mentioned in the installation steps. The manual requires you to fishwire square hole spacers and carriage bolts through existing frame slots and drilled locations. The exact technique is not detailed in this manual; consult the manufacturer or an experienced installer if you are unfamiliar with this method.
1. Fishwire a square hole spacer and carriage bolt through the existing frame slot and down to the existing rearward attachment slot on both sides. 2. Raise the hitch into position and fasten with 1/2" flange nuts. 3. Using the hitch as a template, drill two 1/2" holes per side. 4. Fishwire square hole spacers and bolts to the drilled locations. 5. Attach a flange nut to each bolt and torque all fasteners to 110 lb-ft.
All fasteners must be torqued to 110 lb-ft. This applies to all six bolts and nuts after installation is complete.
Do not exceed your vehicle manufacturer's recommended towing capacity. The hitch itself has rated capacities, but your vehicle's frame, suspension, brakes, and engine have limits that must be respected. Consult your Ford Windstar owner's manual for the maximum towing weight your specific year and model can safely handle.
Periodically check that all fasteners are tight and that all structural components are sound. No specific interval is stated in the manual, but regular inspection before towing is recommended to ensure safety.
The Curt 13085 is designed for 1994–2003 Ford Windstar vans only.
Yes. You must drill two 1/2" holes per side (four total) for additional mounting hardware.
Six grade 8 carriage bolts (1/2"-13 UNC, 1-3/4" long), six grade 8 serrated flange nuts (1/2"-13 UNC), and six square hole spacers (0.250 × 1.00 × 2.50").
Torque all fasteners to 110 lb-ft.
Order by 2 PM ET, Monday–Friday, and it ships the same day.
Total for 3 items: $107.51$105.00
No reviews have been added for this product.