CURT
Verify Fitment
Select your vehicle to confirm this part fits.


















This fits: 2019-2021 Hyundai Veloster Excluding Veloster N
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Hyundai Veloster (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes ball mount #45521 (trailer ball sold separately), pin & clip (Uses pre-existing vehicle hardware for installation)
2019, 2020, 2021 Hyundai Veloster Excluding Veloster N Class 1 Trailer Hitch, 1-1/4" Ball Mount, Select Hyundai Veloster

CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2019 - 2021 | Hyundai Veloster | Excluding Veloster N |
Yes, CURT hitch 11550 is designed for 2019-present Hyundai Veloster SUV models.
The CURT 11550 is rated for a maximum of 2,000 lbs trailer weight and 200 lbs tongue weight when used as a weight-carrying hitch. You must never exceed your vehicle manufacturer's recommended towing capacity.
The CURT 11550 is designed for use with ballmount 45521. Two euro mount options are available: 45571 (1 7/8" ball) and 45572 (2" ball).
You will need a torque wrench, ratchet, 17mm socket, and safety glasses. Using proper tools will greatly improve the quality of the install and reduce installation time.
Two people may be required to ease installation, though it is not explicitly stated as mandatory. Before beginning, read all instructions thoroughly.
No. The CURT 11550 requires no drilling. It uses existing vehicle weldnuts on the frame rails and requires no trimming or welding.
1. Raise the hitch into position and loosely install the supplied hex bolts and 3/8" conical tooth washers. 2. Torque all 10mm fasteners to 34 lb-ft. The hitch uses existing weldnuts on the driver and passenger side frame rails.
All 10mm fasteners must be torqued to 34 lb-ft.
The kit includes 4 M10-1.25 x 30 hex bolts and 4 conical toothed 3/8" washers. The hitch uses existing weldnuts on the vehicle frame rails.
All non-trailer (wheel-less) loads applied to this hitch must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This should be done regularly to maintain safe operation.
Yes. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Safety glasses should be worn at all times while installing this product.
Yes, the CURT 11550 is designed for 2019-present Hyundai Veloster SUV with a 2,000 lbs trailer weight and 200 lbs tongue weight capacity.
No drilling, trimming, or welding required. The hitch uses existing vehicle weldnuts on the frame rails.
Torque wrench, ratchet, 17mm socket, and safety glasses. Two people may be required.
All 10mm fasteners must be torqued to 34 lb-ft.
Maximum 2,000 lbs trailer weight and 200 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes, all non-trailer (wheel-less) loads must be supported by CURT 18050 stabilizing straps. Failure to do so voids the warranty.
Periodically check that all fasteners are tight and all structural components are sound.
Order by 2 PM ET, Monday–Friday, and it ships the same day.
CURT
No reviews have been added for this product.